This is impossible on regular needle, LCD or LED tuners. But here is the gist of the wiki article: “…As such, extremely fine tuning can be obtained, because the user can tune to a particular partial within a given note. This video from Peterson explains it pretty well in just under 4 minutes. So I was going to try to explain it, but it’s so complex, I think I am going to have to refer you to this wikipedia article. But if you are working in mission critical situations where the tuning has to be exactly right, then that is what you need. Ever heard of Peterson Tuners? They make mechanical strobe tuners that range up to $4500! Wow! That is a LOT of money for a tuner. Well there is a tuner that works like that. Why can’t there be a tuner that works like that? The Ultimate Tuner Its a strobe tuner and it actually tells me exactly how many cents sharp or flat I am. It was at this point that I began to think about the Tuner that I use in my Pro Tools rig. ” Well, ok then! Last time I ever use a Snark! Here is what they sent me back: “We are very sorry we do not publish cent information. Definitely not a lot, but to my ear, enough to make a difference. So that means you could have one string that says its in tune but is -2 Cents flat, and another string that says its in tune but is actually +2 Cents sharp. They wrote me back and told me that there was a +/- 2 cent tolerance with their LEDs. So I asked D’Addario about their PW-CT-12. So the question is, exactly what is the tolerance of each LED in regard to Cents? That means if you are 50 cents sharp, you are exactly between two notes on our 12 tone scale. There are 100 Cents in every Minor Second, or Half-Step. If you don’t know, the term Cent is a gradation of tuning. That simple.Īs I was investigating this problem I decided to write a couple tuner manufacturers to ask them about their Cent Tolerances for the LEDS. If your tuner uses LEDs to tell you how sharp, flat or in tune you are, your problem is right there. Have you ever had this problem? Let me explain to you why…. Heck! I even used Tuning Forks! THEY ALL SUCK!!!!! The Boss TU-2, a giant Intellitouch tuner, one of the first clip-ons, a newer Intellitouch PT10, a Snark, a Super Snark and a Snark Super-tight, a bizarre Planet Waves strobe tuner that you held over the strings – weird!, the tuner that is built into my very nice LR Baggs Venue preamp, finally I tried the D’Addario PW-CT-12 NS Micro Headstock Tuner. In fact, I have burned through at least 10 over the years. AGH!!! The Arvada Guitar Tuner collection!Īnd its not as if I did not try other tuners. But just one hair higher and now the Snark said I was in tune but the Boss said I was sharp. But if I put my Snark Clip On tuner on the headstock it would say I was flat! What?!? Ok, so tune the guitar up ever so slightly, then the Snark would say I was in tune and the Boss would say I was in tune. I would tune my guitar with my “trusty” Boss TU-2 tuner, a staple on many a pedal board. So intonation was definitely not my problem. And I used to even have my guitars setup twice a year! Once in the Spring and once in the Fall, as the temperature and humidity levels changed. Now, if you’ve been playing for a while, you know that even a brand new guitar can benefit from a professional “Setup”. I mean, its not completely out of tune, but there are subtle wobbles in the chords. I tune my guitar, the tuner says its in tune. So for years I have been fighting with guitar tuners.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |